Share This Article
Shoppers researching the Navimow i-Series models compared against one another usually start with a single question: which variant actually matches the terrain at hand. Navimow EU splits its i-Series lineup into all-wheel-drive and LiDAR-guided robotic mowers, each tuned to a different mix of lawn size, slope, and landscaping complexity. This overview walks through the AWD, standard LiDAR, and LiDAR Pro variants, their published coverage figures, and the accessories built around them.
Understanding the Navimow i-Series Range
The i-Series covers three distinct groups of robotic mowers rather than a single all-purpose machine. The i2 AWD relies on all-wheel drive and off-road wheels for traction, while the standard LiDAR models and the LiDAR Pro models use mapping sensors to navigate more complex layouts. Looking at the Navimow i-Series model comparison as a whole, the deciding factors are lawn size, slope percentage, and how many distinct zones a garden contains.
Navimow i2 AWD: All-Wheel Drive for Slopes and Uneven Terrain
The i2 AWD pairs all-wheel drive with off-road wheels, which the brand positions as a way to keep traction across slopes, uneven paths, and complex terrain. An automotive-grade ESC system adjusts wheel behaviour in real time, and Navimow EU states this supports smooth, precise movement on slopes up to 45% (24°). Setup is described as antenna-free, with auto mapping intended to make installation faster and largely hands-free.
This variant is classified for lightly landscaped gardens, meaning a few trees, flower beds, or fences to work around rather than a heavily subdivided layout. The i205 and i208 AWD models cover 125 m² and 250 m² per charge, respectively, and the recommendation is lawns between 500 m² and 1000 m². That places the AWD group toward the smaller end of the i-Series lawn size range, and it is also the only group paired with Off-Road Wheels as a factory-listed accessory for added slip resistance.
Navimow i2 LiDAR Models: Coverage and Precision Mapping
The standard LiDAR group, covering the i208, i215, and i220, steps up both mowing area and recommended lawn size compared with the AWD variant. Per-charge coverage runs 265 m², 426 m², and 560 m² across those three models, and the recommended range is lawns between 800 m² and 2000 m². Its slope adaptation matches the AWD rating of 45% (24°), a figure described as suited to gentle inclines, small rocks, or short gravel paths, which keeps the entry requirements for this group close to the AWD line despite the larger coverage numbers.
Setup across the standard LiDAR group follows the same drop-and-mow approach as the AWD model, described as ready to run straight out of the box, with precise edge cutting and smart avoidance of pets, children, or garden decorations. Navimow EU‘s standard LiDAR group clearly handles more area per charge than the AWD model, without requiring the fully landscaped classification reserved for LiDAR Pro.
LiDAR Pro Versus Standard LiDAR: Slope Capability and Landscaping Complexity
The i2 LiDAR Pro models, covering the i210 and i220 LiDAR Pro, are built for more complex terrain than either the AWD or standard LiDAR groups. Slope adaptation for the LiDAR Pro pairing rises to 55% (29°), a step up from the 45% (24°) rating shared by the AWD and standard LiDAR groups, and the recommended range for LiDAR Pro sits between 1000 m² and 2000 m².
Where the LiDAR Pro models depart from the standard LiDAR group is in landscaping complexity rather than raw lawn size. This pairing is classified for fully landscaped gardens, meaning multiple garden areas, narrow paths, or shaded corners rather than a single open stretch of grass. The product listing also describes a LiDAR, Network RTK, and Vision triple fusion navigation system intended to support mowing under trees, through narrow passages, at night, and across open spaces, alongside a third-wheel Xero-Turn steering design built for agile turns without damaging grass.
Battery Runtime and Mowing Area Across i-Series Variants
Mowing area per charge is one of the clearest ways to separate the i-Series lineup once the Navimow i-Series models are set side by side. Coverage per charge peaks at 250 m² for the AWD group, 560 m² for the standard LiDAR group, and 470 m² for the LiDAR Pro pairing, which splits into 195 m² for the i210 and 470 m² for the i220 LiDAR Pro. Although the LiDAR Pro recommended range of 1000 m² to 2000 m² overlaps with the upper half of the standard LiDAR range, that pairing is attached to fully landscaped gardens rather than simply larger open lawns.
- The i205 AWD and i208 AWD cover 125 m² and 250 m² per charge, respectively, and suit lawns from 500 m² to 1000 m².
- The i208 LiDAR, i215 LiDAR, and i220 LiDAR cover 265 m², 426 m², and 560 m² per charge, respectively, and suit lawns from 800 m² to 2000 m².
- The i210 LiDAR Pro and i220 LiDAR Pro cover 195 m² and 470 m² per charge, respectively, and suit lawns from 1000 m² to 2000 m².
- The AWD and standard LiDAR groups share a 45% (24°) slope rating, while the LiDAR Pro pairing is rated for 55% (29°) slopes.
- Fully landscaped gardens, with multiple areas, narrow paths, or shaded corners, are matched to the LiDAR Pro pairing rather than the AWD or standard LiDAR groups.
Accessories and Long-Term Protection Plans for i-Series Mowers
Beyond the mowers themselves, Navimow EU lists a set of accessories built around the i-Series. The Garage S shelter is built for the i1 Series and i2 AWD, protecting the unit from sun and rain without blocking signal or connectivity, while the Garage M shelter is built for the i2 LiDAR Pro and i2 LiDAR models. The Antenna Extension Kit and Antenna Extension Cable improve GPS satellite signal reception where wall or roof mounting is needed, and Navimow Edge Protection Strips add anti-wear TPU coverage against daily bumps and scratches.
For coverage beyond the standard manufacturer warranty, Seel 4-Year Product Protection Plans are listed for several i-Series models, including the i208 AWD, i215 LiDAR, i208 LiDAR, and i220 LiDAR. These plans cover repair or replacement in cases of mechanical or electrical failure. Blade Assembly and Blade Assembly Plus parts are also available for routine replacement across the i-Series line, and Navimow EU stocks the full specification sheets and model availability listings on the official store page before a final variant is chosen.
Closing Thought
Matching a garden’s slope, landscaping complexity, and lawn size to the right i-Series variant lets shoppers find the mower built for their specific needs.
