Share This Article
VOOPOO Navi pod kit models arrive as two compact, refillable-pod devices rather than disposable, single-use bars. Both share a cartridge-based design instead of swapping whole units, and VapeSourcing uk lists both kits with their published specifications, allowing a direct side-by-side comparison. The standard Navi and the Navi SE share a similar footprint but differ in battery size, screen layout, and overall output.
VOOPOO Navi Pod Kit: 1500mAh Battery and Dual Mesh Pod System
The standard VOOPOO Navi Pod Kit runs on a built-in 1500mAh battery and reaches a 24W max output, a ceiling the Navi SE also reaches despite carrying a smaller cell and an added screen. It uses a 10ml VOOPOO Navi dual mesh pod built around 0.6ohm dual mesh coils, and that same cartridge pairs with two selectable power modes for adjusting how the wattage reaches the coil. That combination of refillable capacity and dual coil construction is what separates these VOOPOO Navi pod kit models from simpler closed-pod systems.
This version appears on VapeSourcing uk alongside its own replacement pod cartridge, sold separately in single packs. A single pod style can serve either kit in the Navi range, since the cartridge is not locked to one device. That cross-compatibility is one of the more practical details separating this generation from a typical throwaway pod system.
VOOPOO Navi SE Pod Kit: 1000mAh Battery and Side Display Screen
The Navi SE trims the battery down to 1000mAh while keeping the same 24W max output as its sibling. Its defining hardware difference is a side display screen, a feature the standard Navi does not carry. This places the SE in a slightly different position among VOOPOO Navi pod kit models, aimed at vapers who want a visible readout without a larger chassis.
Both the Navi and Navi SE appear as pre-order items through VapeSourcing uk, listed together in the site’s new arrivals section. The shared listing timing suggests the two kits were built as companion models rather than as a straightforward upgrade path from one to the other.
Battery Capacity and Runtime Differences Between the Two Models
Battery capacity is the clearest point of separation between the pair. The standard Navi carries a 1500mAh cell, while the Navi SE carries a 1000mAh cell, a difference of 500mAh between the two. Neither listing specifies cycle counts or charge time, so comparisons beyond raw capacity are not available from the published specifications.
In practical terms, the larger battery in the standard Navi is the main hardware distinction once the pod and output are accounted for, since both devices sit at the same 24W ceiling. For vapers who weigh a smaller battery footprint against a visible screen, the SE represents a different balance of those two factors rather than a plain downgrade.
Refillable Pod Cartridges and Coil Specifications
The replacement cartridge is listed as compatible with both the Navi and the Navi SE, so owners of either device draw from the same stock of pods, and VapeSourcing uk carries that shared cartridge alongside its full VOOPOO range. This shared cartridge approach keeps coil resistance and capacity consistent across the range, regardless of which battery size a vaper has chosen. Dual mesh construction is the coil type specified for this cartridge, which sets it apart from single-mesh or ceramic coil designs found in some other refillable pod systems.
Power Modes and Output Across the Navi Range
Output on the standard Navi tops out at 24W, and the Navi SE matches that same figure, so wattage is not the differentiating factor between the two kits. Instead, battery size and screen presence carry that role, which is why a direct wattage comparison tells less of the story than the hardware layout does. Both pod kits draw on the same underlying output ceiling, which keeps vapour production and draw resistance fairly consistent between them.
- The standard VOOPOO Navi Pod Kit uses a 1500mAh built-in battery, while the Navi SE uses a 1000mAh built-in battery.
- Both kits share a 24W max output ceiling.
- Only the Navi SE includes a side display screen as a listed feature.
- The standard Navi includes two selectable power modes.
- Both devices use the same 10ml refillable pod cartridge with 0.6ohm dual mesh coils.
Choosing Between Standard Navi and Navi SE Models
Deciding between the two comes down to which combination of battery size and display matters more for a given vaper. The standard Navi offers 500mAh of extra capacity, which may suit those who prefer less frequent charging. The Navi SE, on the other hand, adds a side screen, giving a visual reference that the standard model lacks.
Because the cartridge, coil resistance, and max output overlap so closely across the two, the practical choice among VOOPOO Navi pod kit models rests mainly on battery capacity versus display preference. VapeSourcing uk presents both kits within reach of one another in its catalogue, which makes that comparison straightforward to carry out before settling on either device.
Final Thought on the Navi Lineup
Together, the Navi and Navi SE show how a battery size and a single screen can define separate paths within one pod kit series.
